WELCOME TO ATL EXPERIENCE ONE LOCAL BUSINESS AT A TIME
Community Build Initiative · FIFA World Cup 2026 Atlanta
We Need Atlanta
To Build With Us
Welcome to ATL Experience · Presented by DoorDash · In Partnership with Showcase Atlanta
⚡ Time Sensitive
All units must be complete and delivered by Monday, June 2. Purchase orders ready to issue this week. Partial scope accepted — one unit minimum.

The Welcome to ATL Experience is the official small business activation for FIFA World Cup 2026 in Atlanta — placing 90+ local merchants across three Downtown Atlanta locations over 16 activation days. Our fabrication partner, Kolbe Carvings, built the prototypes and established the build spec. We are opening the remaining units to Atlanta's carpenter and maker community. This is paid work. POs issuing now.

Experience House Large-format merchant store · 10×20 ft format
10×20 FT FORMAT
Width10 ft – 0 in
Depth5 ft – 0 in
Counter Height3 ft – 6 in
A-Frame Peak Height10 ft – 0 in
Cap / Lid½" Ply at 9 ft – 0 in
Frame2×4 Construction + 4×4 Peak
Panels¾" Plywood Sheathing
MobilityLocking Caster Wheels
Under-Counter StorageOpen Shelf at Base
FinishDark Brown Stain — All Exposed Wood
Prototypes complete. Available to inspect at Kolbe Carvings, 510 Alabama St, Carrollton GA. Completed units serve as the full build spec — no guesswork.
Culture Stand Compact merchant cart · 5×10 ft format
5×10 FT FORMAT
Width5 ft – 0 in
Depth2 ft – 0 in
Counter Height3 ft – 6 in
A-Frame Peak Height8 ft – 0 in
Cap / Lid½" Ply at 7 ft – 6 in
Frame2×4 Construction + 4×4 Peak
Panels¾" Plywood Sheathing
MobilityLocking Caster Wheels
Under-Counter StorageOpen Shelf at Base
FinishDark Brown Stain — All Exposed Wood
21 prototypes complete. Available to inspect at Kolbe Carvings, 510 Alabama St, Carrollton GA. Completed units serve as the full build spec — no guesswork.
📐
Prototypes Are Your Build Spec — Come See Them

Both cart types are fully built and available to inspect in person at Kolbe Carvings, 510 Alabama St, Carrollton GA (~45 minutes west of Downtown Atlanta). Walk through the construction, take measurements, photograph every detail, and build with confidence. Contact us to schedule your visit before submitting a bid.

📸 View Prototype Photos →
4×4 Posts
2×4 Framing
¾" Plywood
½" Plywood
1×4 Slats
Steel Corner Brackets
Base Hardware
Locking Casters
Dark Brown Stain
Opportunity 01
Fabrication
Build some or all remaining units to the Kolbe spec. Minimum one unit. Paid per unit upon delivery inspection. No full run required — partial bids accepted.
PO Ready This Week
Opportunity 02
Transportation
Move completed units to three Downtown Atlanta sites: The Center Atlanta (Peachtree Center), Steele Bridge (Centennial Yards), and South Downtown ATL.
Flat Rate Per Location
Opportunity 03
On-Site Install
Crew support for placement, leveling, and securing units across three Downtown Atlanta venues. Day-of coordination required. Mix of indoor and open-air sites.
Day-of Crew Needed
⚠ Short-Term Storage Also Needed

Seeking covered storage space for completed units between fabrication delivery (June 2) and first activation day (June 14). Downtown Atlanta proximity preferred, not required. This is a paid arrangement — if you have a facility or yard that can support this, reach out.

Submit Your Bid · Same-Day Response
Ready to Work?
Tell Us About You.
Partial scope accepted. POs issuing this week. We'll respond the same day with next steps and a prototype visit window.
Fields marked * are required.
Prefer email? Reach Warren Wills directly at
warren@willsbusinessadvisory.com